1. Introduction
Loader is a kind of earthwork construction machinery widely used in highways, railways, construction, hydropower, ports, mines and other construction projects. It is mainly used for shoveling bulk materials such as soil, sand, lime, and coal, and can also be used for ore , Hard soil, etc. for light shovel and digging operations. Different auxiliary working devices can also be used for bulldozing, lifting and other materials such as timber loading and unloading operations.
In the construction of roads, especially high-grade highways, loaders are used for filling and excavating roadbed works, asphalt mixtures and aggregate and loading of cement concrete yards. In addition, it can also carry out operations such as pushing soil, leveling the ground and pulling other machinery. Because the loader has the advantages of fast working speed, high efficiency, good maneuverability, and light operation, it has become one of the main types of earth and stone construction in engineering construction.
2. Features:
higher power and reliability.
Heavier chassis
Hydrodynamic transmission, three-element and single stage torque converter, high
reliability, easy maintenance.
high efficiency and easy maintenance.
Gear-shift controlled by flexible shaft makes operation more flexible and reliable
Single lever joystick control system, comfortable and flexible operation.
Double sealed hydraulic pipeline joints with 24°awl and O ring of international standard, avoids oil leakage obviously;
Air over hydraulic disks on four wheel brakes.
Large space articulated frames make operation and traveling stable.
Working device with automatically leveling ability at high position.
Bucket articulated points take sealed, lubricated, dust-proof layers, which owns good durability.Integral, luxury instrument board.
New, luxury cabin
3. parameter
| Performance | 1 | Rated load | 4000kg |
| 2 | Overall weight | 12360kg | |
| 3 | Rated capacity | 2.35m3 | |
| 4 | Max. Tractive force | 100KN | |
| 5 | Max. Breakout force | ≥120KN | |
| 6 | Max. Grade ability | 30° | |
| 7 | Max. Dumping height | 3250mm | |
| 8 | Max. Dumping reach | 1100mm | |
| 9 | Overall dimension L x W x H | 6910x2510x3300mm | |
| 10 | Min. Turning radius | 5160mm | |
| Engine | 11 | Model | DongfengCummins6BTA5.9-C150 |
| 12 | Type | Turbocharged water & air colling | |
| 13 | No. of cylinder-bore/stoke | 6-102x120mm | |
| 14 | Rated power | 112kw-2200r/min | |
| 15 | Max. torque | 670N.m | |
| 16 | Min. Fuel-consume ratio | ≤205g/kw.h | |
| Transmission | 17 | Model | YD13 electronic control gearbox |
| 18 | Gear shift | 4 forward, 3 reverse. Electronic control gear shift | |
| 19 | Max. speed | 36km/h | |
| Drive axle | 20 | Main reducing spiral | Bevel gear grade 1 reduction |
| 21 | Decelerating mode | Planetary reduction, grade 1. | |
| 22 | Wheel base | 2845mm | |
| 23 | Wheel tread | 1865mm | |
| 24 | Min. ground clearance | 380mm | |
| Hydraulic system | 25 | System working pressure | 18MPa |
| 26 | Boom lifting time | 5.5+0.2s | |
| 27 | Total time | 10+0.5s | |
| 28 | Fuel tank capacity | 120L | |
| 29 | Leveling automatically | Yes | |
| Break system | 30 | Service brake | Air over hydraulic disc brake on 4 wheels |
| 31 | Parking brake | Air break control | |
| Tyre | 32 | Type | 20.5-25 |
| 33 | Front tyre pressure | 0.35Mpa | |
| 34 | Rear tyre pressure | 0.2Mpa |
(1) Dongfeng Cummins 6BT5.9-C130 engine (97Kw/ Euro I)
(2) Air Condition
(3) Joystick control
(4) Quick-hitch
(5) Fork
(6) ROPS
Remark:YD13 electronic control gearbox,Joystick control and heavy chassis for standard
SM940 Wheel Loader (with 2.3 cbm, 4.0 ton capacity, Dongfeng Cummins 6BTA5.9-C150 engine, YD13 electronic control gearbox, Joystick control, Heavy chassis, luxury cabin.)
Optional:
(1) Quick-hitch
(2) Fork
(3) ROPS
Quality certificate:
(1)CE Approved.
(2)Obtained the certificate of ISO9001:2008.
(3)Manufacturing license number: TS2510025-2009.
5. Guarantee period:
1 year
6. Applications
7. Spare part supply
8. Delivery time:
Delivery time: 30 working days
9. Services
Technical Guidance:
1. Provide the video for technical guidance
2. Factory send technician to agent country for technical guidance three times per year
3. Agent also could send technician to our factory to learn technology
3. Agent also could send technician to our factory to learn technology
Training Support:
1. Provide the video for training
2. Factory send technician to agent country for training three times per year
3. Agent also could send technician to our factory to learn technology
2. Factory send technician to agent country for training three times per year
3. Agent also could send technician to our factory to learn technology
After-sale Service:
Factory provide one year or 2000 hours after sales service in worldwide, Agent shall provide local technicians and staffs to satisfy the management , operation and training of after sale service, and provide workshop, warehouse, office and other facilities to support a sustained after sale service.